Are acrylic mirror wall stickers good? Acrylic processing
Acrylic mirror wall stickers are good? Introduction to acrylic mirror wall stickers 1. Let us first understand what kind of acrylic is made of. Acrylic is also called Acrylic. The chemical name is polymethyl methacrylate. It is a plastic polymer material that has been developed earlier. It has good chemical stability and transparency, weather resistance, easy dyeing, easy processing, and beautiful appearance. It is used in the construction industry. There are more. Plexiglass products are divided into three types: cast plates, extruded plates and molding compounds. 2. Acrylic lens series--thickness: 1.0-6.0mm, specification: 1220×1830mm, environmental protection, non-bending, fragile, temperature resistance 120 degrees, fireproof, fireproof grade is 94-V2, alias: acrylic, PMMA , Acrylic, Plexiglass, can make transparent plate, paint lens, double-sided lens, paper lens, rubber lens, brown panel, silver lens, golden lens, brown semi-lens lens, silver semi-lens lens, environmental protection lens, Display stands, makeup mirrors, handicrafts, etc.; the main processes are optical electroplating, laser cutting. 3. The plexiglass lens series is also called plastic lens. There are mainly two materials of acrylic PS. The biggest difference between plastic lens and glass is that it is safe and not fragile. After a series of processing and electroplating, the same clarity of glass lens can be achieved. Full color semi-lens lenses can be made into transparent plates, painted lenses, double-sided lenses, paper lenses, rubber lenses, brown panels, silver lenses, golden lenses, brown semi-lens, silver semi-lens, environmental protection lenses, display Frames, makeup mirrors, handicrafts, etc.; the main processes are optical electroplating, laser cutting. Is the mirror wall sticker good? How to remove the acrylic mirror wall sticker 1. How to remove the latex paint wall sticker: first use a hair dryer to properly heat the wall (usually heated to about 40 degrees), and then try to tear the wall sticker At the corner, if you find that the back of the wall sticker is not degummed, you can slowly tear it off. Of course, the temperature can not be heated too high or continuous heating, it is easy to degumming or even the wall paint peeling off. Basically all wall stickers can be removed with this method, even if there are a small amount of traces, you can slowly remove it with a knife. 2. The method of removing glass and other wall stickers that are not easy to damage the wall: In addition to removing the wall stickers using method 1, you can tear it off directly with your hands. If there are residual marks, you can use alcohol, detergent, gasoline, etc. to remove.